Candan Automatic Air Release Device 1/2 10 Bar

FACES OF USAGE
Solar Energy Systems
Closed Circuit Systems
Closed Circuit Systems
Bombs
Heating Installations

TECHNICAL SPECIFICATIONS
Mother size = 1/2" (Male)
Body = Brass
Max Working Pressure = 1 - 10 (bar)
Max Temperature = 115 °C
Standard = TS EN 7817
Sealing gasket = NBR
Springs = Inox
Pvc = Glass fiber Nylon
Automatic Air Release Device 1/2"
Radiator, It increases the heating efficiency of the system by discharging the air trapped in the fan coil, pipes and collectors.
It helps to realize a balanced heat distribution in the installation, saves fuel and increases the comfort of use.
It can be used at fluid temperatures up to 115°C and operating pressures up to 10 bar.
It is easy to assemble and problem-free to use.

In closed circuit heating systems working with water, it is used to automatically evacuate the air formed in the installation. Since the air in the system prevents fluidity, it prevents the system from working properly. Surfaces that do not come into contact with water due to air deform more quickly. The automatic air venting device (purge) eliminates such problems and improves circulation performance
The automatic air venting device (purge) is never used for pressure relief. The mounting valve supplied with the device allows the device to be removed and installed while the system is in operation. The device must be connected to the top of the system. The opening and closing screw must be in the open position for evacuation.