Dyo Hidrolüx 7.5 Liter White Water Based Wood Metal Paint
- Stock: In Stock
- Reward Points: 23160
- Model: CLZ202-2602658
- Weight: 1.00kg
Dyo Hidrolüx 7.5 Liter White Water Based Wood Metal Paint
HIDROLUX High Gloss Paint for Wood, Metal and Masonry Surfaces
DESCRIPTION: Acrylic emulsion based, glossy, top coat paint used for decorative purposes.
Features : Odorless, friendly to human health and the environment, resistant to wiping with water, covering, non-yellowing,
Paint resistant to impacts and scratches.
APPLICATION : Topcoat on wood, metal and mineral surfaces after proper surface preparation
used as paint.
FORM OF APPLICATION :
Surface Preparation:
On surfaces to be newly painted; On wooden surfaces to be newly painted, knots are burned and Pinosan Decorative
When Super Putty is used to remove surface defects after saturation with Wood Preservative
Surface with Dyo Primer Paint or Dyo Kivastar, surface with Dyobinder when using Acrosuper Putty
Primer should be applied. Metal surfaces should be cleaned from all kinds of dirt, rust and grease and then treated with Dyo Antirust
must be primed. Dyorite Putty for a smooth, even finish on mineral surfaces
After application, the surface should be primed with Dyobinder.
"Insulation primers should never be used in the priming process".
On old painted surfaces; the surface is free from all kinds of oil, dirt, loose and blistered layers
Cleaned. Surface correction with Dyorit Putty or powder putties where necessary
after that, Dyobinder is applied to the entire surface.
On old synthetic paintedsurfaces; Dyo Transition Primer is applied as a single coat after the surface is lightly sanded and sanding dust is removed from the surface.
Painting:
After 24 hours after primer application, it is applied in 2 coats by brush or roller without thinning. In order to obtain a smooth application, combing should be done in one direction and over combing should be avoided.
It is recommended to wait at least 6 hours between coats .
Paintable Area : Depending on the surface in a single coat, 14-16 m2 area can be painted with 1 L and 11-13 m2 area can be painted with 1 kg.