Hemel Timbercare Aqua Impregnation 20 Liters Transparent

Water-based impregnation applied with a brush to prevent rotting of wood

Pine etc. soft textured woods to be used by painting on ground level

General Features:

Easy application with brush

Colorless

Smellless

Compliant with European norms

Environmentally friendly

Ready to use

Areas of Use:

All hard pine, etc., soft-textured woods to be maintained above ground level and to be painted over

Application Amount:

4-5 m² surface is wetted with 1 L.

Surface Preparation:

The wood must be completely clean and the humidity must be below 20%.

Application:

The product is ready to use and does not require thinning.

Apply the product with a brush to completely wet the wood surface.

After impregnation, allow the wood to dry for at least 24 hours before applying paint/varnish.

General Instructions:

FOR INDOOR/OUTDOOR USE.

Close the lid of the product after application.

The general application temperatures of the product are between 15-25°C and 40-65% relative humidity.

The humidity of the wood to be applied should be below 20%.

The product should be protected against freezing and stored between 5°C and 35°C.

Clean the tools and equipment used during the application with plenty of soap and water.