Dyo Hidrolüx 0.75 Liter White Water Based Wood Metal Paint
- Stock: In Stock
- Reward Points: 2800
- Model: CLZ202-462
- Weight: 1.00kg
HIDROLUX High Gloss Paint for Wood, Metal and Masonry Surfaces
DESCRIPTION: Acrylic emulsion based, glossy, top coat paint used for decorative purposes.
Features : Odorless, friendly to human health and the environment, resistant to wiping with water, covering, non-yellowing,
Paint resistant to impacts and scratches.
APPLICATION : Topcoat on wood, metal and mineral surfaces after proper surface preparation
used as paint.
FORM OF APPLICATION :
Surface Preparation:
On newly painted surfaces; On newly painted ahwood surfaces, knots are burned and Pinosan Decorative
When Super Putty is used to remove surface defects after saturation with Wood Preservative
Surface with Dyo Primer Paint or Dyo Kivastar, surface with Dyobinder when using Acrosuper Putty
primer. Metal surfaces should be cleaned from all kinds of dirt, rust and grease and then treated with Dyo Antirust
After application, the surface should be primed with Dyobinder.
"Insulation primers should never be used in the priming process".
On old paintedsurfaces; the surface is free from all kinds of oil, dirt, loose and blistered layers
cleaned. Surface correction with Dyorit Putty or powder putties where necessary
and then Dyobinder is applied to the entire surface.
On old synthetic painted
surfaces; the surface should be lightly sanded and sanding dust should be removed from the surfaceafter being removed, Dyo Transition Primer is applied in a single coat.
Painting:
After primer application
, it is applied in 2 coats with a brush or roller without thinning 24 hours later. SmoothScanning should be done in one direction and over scanning should be avoided in order to obtain an application.
It is recommended to wait at least 6 hours between layers
.Area that can be painted: Depending on the surface in a single coat, 14-16 m2 area can be painted with 1 L and 11-13 m2 area can be painted with 1 kg.
