Pinosan Parquet Varnish Glossy 2.5 LT Glass Polish
- Stock: In Stock
- Reward Points: 5170
- Model: CLZ202-632
- Weight: 1.00kg
PRODUCT SPECIFICATIONS
Uretan alkyd based, one component, glossy parquet varnish.
Excellent scratch and impact resistance.
Protects the applied surface against chemicals.
FORM OF APPLICATION AND AREA TO PAINT
Used on parquet and all kinds of wooden surfaces.
The surface must be free of dust, dry and clean.
On dry and clean new parquet surfaces, Pinosan Cellulosic Parquet Filler Varnish should be applied in two coats with an interval of 1-2 hours and light sanding should be done after sufficient drying.
It is ready for application. No thinning required.
Apply two or three coats with a brush or roller depending on the absorbency of the surface. The first coat should be thinned with 10-15% Dyo Synthetic Thinner to ensure that the varnish penetrates the surface well. It is recommended to wait 5-6 hours between coats and sand roughness.
Completes its hard drying after 24 hours, gains its physical and chemical durability within 3-4 days.
Depending on the surface in two layers;
* 0.75 L covers 6-7 m² of surface.
** 2.5 L covers 20-23 m² of surface.
*** 15 L covers 120-138 m² of surface.
**** 12 kg covers 65 - 98 m² of surface.
