Pinosan Cellulosic Parquet Filler Varnish 0.75 LT
- Stock: In Stock
- Reward Points: 1840
- Model: CLZ202-635
- Weight: 1.00kg
PRODUCT FEATURES
Nitrocellulose-based one-component filler varnish.
Fills the pores and joints of wood and parquet, prevents the topcoat varnishes to be applied on it from being absorbed by the wood, creates a smooth floor, saves time and material.
FORM OF APPLICATION AND AREA TO BE PAINTED
Specially formulated for use on all kinds of wood, wood veneer and parquet surfaces.
Surface should be cleaned and sanded if necessary.
It is ready for application. It does not require thinning.
Apply two or three coats with a brush or roller depending on the absorbency of the surface. It is recommended to wait 20-30 minutes between coats. Depending on the ambient temperature, it can be sanded after 1-2 hours.
In two coats, depending on the surface;
* 3.5-7.5 m² surface is covered with 0.75 L.
** 2.5 L covers 12.5-22.5 m² of surface.
*** 60-100 m² surface can be covered with 12 L.