Izocardi Iso Crack Merbran 1 Kg

ISOCARDIA Fissure Membrane

Places of use

Terrace roofs, concrete, screed cracks, caromosaic and tile joints.

For crack repairs caused by superficial movements in floors

Insulation of wet floors under tiles such as bathrooms and wc, swimming pools

Cracks in chimney bottoms

To prevent water and corrosion in foundation and foundation curtain walls, concrete structures

Building exteriors

Parapet wall bottom and corners, upper marble coating cracks

Fish anchors in bottom cracks

Insulation of viaduct - bridge concrete before asphalt

Joints of decks and paneling floor coverings of boats and yachts

Water tank and concrete silo cracks

In cracks and roof gutters of concrete pipes and irrigation channels

Preventing corrosion of underground oil and water tanks

It can be safely used in cold storage against water and humidity.

When pooling on walls and chimneys, two coats are applied after feeding with triangular lath at corners and joints.

PHYSICAL - CHEMICAL PROPERTIES AND PRODUCT ADVANTAGES

İZOCARDİ CRACK MEMBRANE is an elastomeric, ready to use, high performance, polyurethane based one component waterproofing membrane that can be walked on. Maintains its initial properties for years. It has a high solid content. IZOCARDI CRACK MEMBRANE is a membrane with high tear resistance that maintains its continuous elasticity and does not form joints and joints. With its self-leveling feature, it penetrates deep into cracks and forms a crack bridge. Thanks to its elasticity and high tear strength, it is resistant to surface movements and vibrations caused by temperature changes. It is not affected by sea water. It has abrasion and impact resistance. IZOCARDI CRACK MEMBRANE adheres perfectly to prepared concrete and porous surfaces and sheet metal. It maintains its flexibility for a long time between -30°C and +90°C. Forms a flexible bridge in cracks up to 5 mm in width. It has ultraviolet resistance. Slightly yellowing over time. Does not lose its properties. Shelf life is 1 year without opening the packaging cover. Touch drying in 3 hours, full hardening in 5 days. It can be walked on after curing. IZOCARDI CRACK MEMBRANE has high resistance to acid, base and salty environments, does not produce bacteria, does not smell, does not rot, is resistant to plant roots, long-lasting and environmentally friendly. It has the ability to breathe.

SURFACE PREPARATION

Before application, the surface must be clean, dry and free from oil, paint and similar contaminants that prevent adhesion. Particular care should be taken to ensure that the concrete is not sandblasted. This test is done by scratching the concrete floor with a nail. If the floor is sandblasted, it is reinforced and then applied.

principles of implementation

ISOCARDI CRACK MEMBRANT Apply to the prepared surface with a toothed spatula, brush or airless gun. The material should be thoroughly mixed before use. 2nd and 3rd coats are applied with one day intervals. For cracks wider than 5 mm, it is important to stick a mesh on the first coat before drying for long-lasting crack repair. Ambient and ground temperatures should be min +5°C max +30°C. It is recommended to widen capillary cracks before application. If the amount of cracks is high, the application should be made on the entire surface.

PRICE

It depends on the number of layers to be applied to the floor. With 1 kg, a 5 cm wide and 15 m long cracked surface can be covered.

PACKAGING

1 KG

The applied surface must be dry. It should be learned that there will be no precipitation at least 1 hour after the membrane application. Application should be done with gloves. In case of skin and eye contact, it should be washed with plenty of water. Absolutely do not use thinner etc. thinners. It should not be applied in closed areas due to long-term solvent odor. Close the package lid tightly for long-term use.

CLEANliness

After use, the tools are cleaned with cellulosic thinner.

Features

TEST

DENSITY 1.40 g/cm³

WALKING ABOVE 16-24 hours at 23°C

SERVICE TEMPERATURE -30°C - +90°C

SUBFloor Temperature +5°C - +30°C

Solid Matter Ratio Approximately 90%

SHARVAGE (SINGLE SINGLE) 0.40 - 0.70 kg/m²

SHORE HARDNESS A-65 (7 days)

STRONG>STRONG>STRONG>STRONG>SHINK RESISTANCE DIN 53 504 >81,58 Kg/cm² (7 days)

BREAKING EXTENSION DIN 53 504 450% (7 days)

ChemICAL RESISTANCE ACIDIC AND BASIC SOLUTIONS