Hemel Timbercare Aqua Impregnation 1 Liter Transparent
- Stock: In Stock
- Reward Points: 1880
- Model: CLZ202-3148
- Weight: 1.00kg
Water-based impregnation applied with a brush that prevents rotting of wood
Pine etc. soft textured woods to be used by painting on ground level
General Features:
Easy application with brush
Colorless
Smellless
Compliant with European norms
Environmentally friendly
Ready to use
Areas of Use:
All hard pine, etc., soft-textured woods to be maintained above ground level and to be painted over
Application Amount:
4-5 m² surface is wetted with 1 L.
Surface Preparation:
The wood must be completely clean and the humidity must be below 20%.
Application:
The product is ready to use and does not require thinning.
Apply the product with a brush to completely wet the wood surface.
After impregnation, allow the wood to dry for at least 24 hours before applying paint/varnish.
General Instructions:
FOR INDOOR/OUTDOOR USE.
Close the lid of the product after application.
The general application temperatures of the product are between 15-25°C and 40-65% relative humidity.
The humidity of the wood to be applied should be below 20%.
The product should be protected against freezing and stored between 5°C and 35°C.
Clean the tools and equipment used during the application with plenty of soap and water.