Izocardi All Season Transparent Waterproofing Liquid 1 Kg

DESCRIPTION
It is a solvent-free, heavy metal-free, non-toxic, hybrid polymer, based, fast curing, transparent waterproofing material suitable for pedestrian traffic, which can be applied on wet and damp surfaces at +5 degrees and above from inside and outside. No primer required. Creates up to 2 mm crack bridges. It has UV resistance. Provides a solid and seamless surface formation. Performance and adherence are at the same efficiency even at low temperatures. Does not lose its effect from direct contact with moisture and water (immersion and submersion).

AREAS OF USAGE
On terraces and balconies with pedestrian traffic.
Preventing moisture formation on the interior and exterior surfaces of ground and basement floors.
In capillary cracks up to 2 mm in concrete, screed and joints.
On the interior and exterior surfaces of dome and vault roofs.
In hidden streams and rain gutters.
In waterproofing under and above ceramics.
Preventing the formation of thrush and moisture on walls.
On ceramic, glass mosaic, metal, wood, granite and stone surfaces.

ADVANTAGES
Applicability on wet and damp surfaces.
No primer required.
Fast and complete curing.
Breathability.
Applicability on unrefrigerated but hardened concrete surfaces.
No electrical conductivity.
Easy to apply.

SURFACE PREPARATION AND APPLICATION
The surface should be clean, free of dust, dirt, oil, etc. that will prevent adhesion.
Unsound floors should be repaired in a way that will not cause spillage.
The application surface may be damp, but if there is water accumulation, it should be swept.
It cannot be mixed and diluted with another material, it is ready to use.
Cracks wider than 2 mm should be repaired, application should be done after that.
After the first coat is applied, it should be waited 12-24 hours depending on weather conditions, then the 2nd coat should be applied vertically.
Application is done with brush, roller and airless gun.
Application tools should be cleaned immediately with neutral detergents or polyurethane thinner.