Pinosan Parquet Varnish Matte 0.75 LT Glass Polish

PRODUCT SPECIFICATIONS

Uretan alkyd based, one component, easy to apply matt parquet varnish.

Scratch resistant.

Creates a film resistant to water, detergents and chemical agents.

FORM OF APPLICATION AND AREA TO PAINT

Used on parquet and all kinds of wooden surfaces.

The surface should be cleaned and sanded if necessary.

First, Pinosan Cellulosic Parquet Filler Varnish should be applied in two coats with an interval of 1-2 hours on new parquet surfaces that are properly scraped, dry and clean, and light sanding should be done after sufficient drying.

It is ready for application. No thinning required.

Apply two or three coats with a brush or roller depending on the absorbency of the surface. It is recommended to wait 5-6 hours between coats and sand the roughness.

Completes its hard drying after 24 hours, gains its physical and chemical durability in 3-4 days.

Depending on the surface in two layers;

* 0.75 L covers 6-7 m² of surface.

** 2.5 L covers 20-23 m² of surface.

*** 15 L covers 120-138 m² of surface.

**** 12 kg covers 65 - 98 m² of surface.